• Home
  • Blog
  • Belkin Router Connect But No Internet Access

Belkin Router Connect But No Internet Access

There is an issue which many users face most of the time related to Belkin router but no Internet Access. It is very disturbing to several users at the time of doing something important as well as serious. To access a wifi signal on your Belkin router is completely dependable on many conditions related to trafficking or any kind of linking problem. The usage router is to have security features which are used to safeguard your connection against malware, trojans and intruders. If, configured incorrectly, you may not be able to gain access to your router. Successful connection to the Belkin Router also relies on properly configured network settings in the Windows operating system. If you are having problems accessing your Belkin router, You have to start by connecting directly to the router through an Ethernet cable.  

Connection through ethernet or troubleshoot:-

1.You locate the Ethernet jack on the rear of your Belkin router. This is usually found at the top, and for your kind information, the jack is typically coloured white on the Belkin router.

2.Connect an Ethernet cable to the jack on the Belkin Router, and plug the other end into the port on your computer. For further execution, you have to allow about three minutes for a connection to establish between the two devices.

3.Now you have to open a Web browser. And Type “192.168.2.1” inside the address field and press “Enter.” This opens a Belkin Web page on your screen. If in case this screen did not get loaded, reset the Windows TCP/IP settings.

4.Click at the “Login” link at the top of the Belkin Web page. This draws a screen asking for your password. By default, the Belkin Router does not ship with a password. If you have not created one, leave the field empty and click on “Login.” Otherwise, enter your password in the password column.

Reset Windows TCP/IP Settings:-

  • Click on the "Start" button.
  • Type “CMD” in the Start Search box.
  • Right-click “CMD” in  Windows search result and then select “Run as Administrator” to open a command prompt panel.
  • Type “CMD” in the Start Search box.
  • Type “netsh int ip reset c:\resetlog.txt”. Press “Enter.”
  • Restart the computer when prompted.

Have a look on your Wifi Security Settings:-

  • Click: “Encryption” option, located under the “Wireless” section on the left pane. This opens a Wireless Security window. Belkin router provides various forms of encryption methods within the two modes. First and most used is Wired Equivalent Private network.  Now, the second mode is Wi-Fi Protected Access or WPA.
  • Look at the Security Mode drop-down menu. If this says, “Disabled,” wireless encryption is not enabled on your network, which means your problem is not at all security-related. If,  “64 bit WEP,” 128 bit WEP,” “WPA/PA2 – Personal,” “WPA PSK,”selected option in this drop-down menu or other “WEP” or “WPA” mode, you must have wireless security activated on your router. Generally, if “Disabled” is not selected, you have the security activated. Later on, you will need to ensure the appropriate key is entered in the Windows operating system (WOS).
  • Look at the Passphrase field. This key must be entered on all devices wishing to connect through the Belkin Wifi service when security is activated. Keep record of this key, and then minimize the Belkin Web interface window.
  • Click the “Wireless” icon in your taskbar. Now you have to Click on the select your Belkin router from the available networks list, and click “Connect.” When prompted, enter the passphrase. Keep on reading if this does not solve your problem or you cannot see your Belkin router in the list of available networks. Then your problem is not regarding a security-related issue.

Check your Wireless Broadcast Settings:-

  1. Maximize to the Belkin Web Interfacing system.
  2. Click on the “Channel and SSID” link at the top of the “Wireless” section on the left pane.
  3. Now for proper execution, you have to Locate to the “Broadcast SSID” box. Ensure that this field is selected. Now, click to place a check in the box, and click to the “Apply Changes” button. Read it further if this option was selected already or the problem remains as it is.

Reset the Belkin Router:-

  • Locate at the “Utilities” section near the bottom of the left pane.
  • Click the “Restore Factory Default” link. This process will pop-up a screen of information regarding what will be reset during this complete process and asks for the confirmation. Click: “Restore Defaults” button on this screen. Now, this prompts you with a message from a Web page dialogue box.
  • Click on the “OK” button on this dialogue box to confirm it. The Belkin Router will perform an automated restore and then reboot it automatically. For now, you have to restart your computer once the Belkin Router has rebooted.

Note:-  Any user do not have to boggle up everytime to access the internet if Belkin Router is connected with the devices. Above is the detailing of key points regarding Internet Access by Belkin Router. By performing above tasks reboot your system and easily do your operations.

0 CommentsLeave A Comment

Leave A Comment on " Belkin Router Connect But No Internet Access "